|
|
|
|
|
|
|
|
|
|
|
|
|
|
#8 split lock washer
|
# 6 split lock washer
|
#10 split lock washer
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#12 split lock washer
|
8-32 X 5/16 " Fillister head slotted screw . Common use is throttle plate screws on single barrel DLTX carburetors, they also fit our new Ensign throttle shafts and have other uses. Order lockwasher separately, part 8LW
|
6-32 X 1/4 " Fillister head slotted screw . Common use is choke plate screws on single barrel DLTX carburetors, they also fit our new Ensign choke shafts and have other uses. Order lockwasher separately, part 6LW
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#4 X 1/4" SEMS Pan head slotted screw with internal tooth lock washer
|
#6 X 1/4" SEMS Pan head slotted screw with external tooth lock washer
|
10-32 X 5/8" Fillister head slotted screw . Common use is the throttle body to bowl screws on Zenith 61 , 161 , 67 , 68 and some other carburetors. Order lockwasher separately, part 10LW
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10-24 X 5/8" Fillister head slotted screw . Common use is Farmall cub bowl to body screws and some other carburetors. Order lockwasher separately, part 10LW
|
Marvel Schebler TSX choke friction washer. This washer along with a spring and shoulder screw (24-480 and 15-397) holds friction on the choke lever on carburetors designed as such. Some applications are "L" John Deere hand choke, some Allis Chalmers carburetors, some International Farmall carburetors , some TSV carburetors and others. wasCarburetor number will hopefully be added at a later date when we have time.
|
#4 X 1/4" SEMS Pan head slotted screw with external tooth lock washer
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12-24 X 3/4" Fillister head slotted screw . Common use is the throttle body to bowl screws on medium and large ( 1-3/16" , 1-5/16" & 1-7/16" throttle bore diameter) TSX carburetors, and Zenith 267 series. Order lockwasher separately, part 12LW
|
#5-40 X 1/4" SEMS Pan head slotted screw with split lock washer. Typically used as throttle and choke disk screws on thousands of Zenith , some Marvel Schebler carburetors, and others.
|
International Farmall Cub carburetor nozzle and main jet gasket replaces 47401D. Also used on some small TSX nozzle gaskets and Zenith 161 nozzle gasket and 28/228 series. Nominal dimensions are 1/4" ID X 3/8" OD X 0.050" thick.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
oring fits TSV main jet(not nozzle) most medium TSX load adjusters with oring seal(not the type with a packing nut) and USX manual load needle
|
#5-40 X 5/16-3/8" long. Exact length and material may vary with stock on hand. Oval head machine screw Use on IH Farmall carburetor throttle shafts and most Zenith with tapered hole shaft.
|
12-24 X 5/8" Fillister head slotted screw . Common use is the throttle body to bowl screws on small ( 1-1/16" & 1-1/8" throttle bore diameter) TSX carburetors. Also generally the length installed on 267 Zenith although book specifies 3/4". Order lockwasher separately, part 12LW
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DLTX 2 barrel channel plug ball. There are typically 6 used on gasoline carbs and 8 on all fuel carbs originally. We use these in rebuilding in their original locations except for the idle passages. On the idle passages we highly recommend tapping 8-32 threads and installing 15-409 (4 places) removable plugs for future serviceability.
|
single barrel DLTX carburetor idle and load needle friction ball and used on some TRX choke
|
O ring for 2 barrel DLTX load screw used on John Deere 50 through 730 replacing R10093. Also fits the medium size TSX when a fixed plug is used in place of the adjustment.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dual DLTX nozzle gasket roughly 1/4" ID X 3/8" OD
|
Dual nozzle plug, H nut, flt. val. gasket
|
Can be used on the strainer bolt of 1 bbl DLTX and Ensign strainer cage nut
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
9/16" welch expansion domed thin aluminum plug for various applications, highly recommend 179-39 steel plug for DLTX 2 barrel top plug
|
8-32 X 1/4" SEMS Pan head slotted screw with external tooth lock washer
|
#8 X 5/16" SEMS Pan head slotted screw with external tooth lock washer
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
80-169 brass cup plug nominal 1/4" diameter for some Marvel Schebler TSX throttle shaft hole and DLTX 67 71 72 73 drilling plug on throttle body and choke shaft
|
24-340 idle mixture screw spring use for small and medium TSX and TSV carburetor
|
CT57-4 shaft felt seal wiper International CUB Farmall TSX Zenith 61 161 68. Felt is not dimensionally stable and is somewhat compressible but nominal dimensions are 1/4" ID X 7/16" OD X 3/16" thick. replaces 45149DA
|
|
|
