|
|
|
|
|
|
|
|
|
|
|
|
|
|
#6 X 1/4" SEMS Pan head slotted screw with external tooth lock washer
|
DLTX 2 barrel channel plug ball. There are typically 6 used on gasoline carbs and 8 on all fuel carbs originally. We use these in rebuilding in their original locations except for the idle passages. On the idle passages we highly recommend tapping 8-32 threads and installing 15-409 (4 places) removable plugs for future serviceability.
|
O ring for 2 barrel DLTX load screw used on John Deere 50 through 730 replacing R10093. Also fits the medium size TSX when a fixed plug is used in place of the adjustment.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dual DLTX nozzle gasket roughly 1/4" ID X 3/8" OD
|
Dual nozzle plug, H nut, flt. val. gasket
|
8-32 X 1/4" SEMS Pan head slotted screw with external tooth lock washer
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#8 X 5/16" SEMS Pan head slotted screw with external tooth lock washer
|
7/16" nominal (0.440") measurement aluminum welch domed expansion casting plug used on IH M style carbs, Carter UT and other applications as shaft hole plugs. If using for John Deere DLTX 2 bbl carburetor we recommend 179-15 as it will provide a better seal on the passages.
|
Dual bottom all fuel cap casting plug
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DLTX 26 & 46 , TSX TSV and DLTX 2 barrel needle seat gasket also other applications. Roughly 3/8" ID X 1/2" OD X 1/32" thick
|
O-ring used on John Deere applications, check parts book before ordering replaces A4365R
|
R10088 16-58 3/4" hard fiber outer bowl nut gasket 2 barrell DLTX John Deere 50 60 70 520 620 720 530 630 730 Also used in some Zenith applications
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flat choke washer
|
O-ring used on John Deere applications, check parts book before ordering replaces A3917R
|
Stainless steel float pin for double barrell DLTX
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
7/16" welch expansion domed plug for DLTX 2 barrel carburetors used on John Deere
|
Ensign strainer cage igloo gasket also fits John Deere 530 630 730 2 barrel DLTX carburetors when equipped with vent chamber gasket roughly 1.625" X 1.328" X 1/16" replaces F3248R
|
Strainer gasket
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
9/16" welch expansion domed steel plug like original for DLTX 2 barrel carburetors top plug used on John Deere 50 520 530 60 620 630 70 720 730
|
Felt packing
|
Cupped choke washer
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dual intake gasket
|
Marvel Schebler carburetor idle speed screw spring used on all TSX , USX , 2 barrel DLTX and single barrel carb numbers DLTX 67 71 72 73 107U 108U
|
Dual manifold gasket
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dual idle screw spring
|
Dual throttle bushing
|
Choke spring
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Brass 7/16" hex head 1/8 NPT plug
|
DLTX double barrell throttle yoke stainless pin
|
Brass 1/4" hex plug fitting
|
|
|
